Guide

Hyperliquid Discord Bot: Trade Perps and Spot With Flippy

Flipsuite

Updated 6 min read

Flippy is a Hyperliquid Discord bot that trades perps and spot from a chat message. Type "@Flippy open BTC long with 10x leverage and $20 margin, stop loss at 90k" and Flippy shows the order with size, liquidation price, and fees, then places it on Hyperliquid when you confirm. You don't host anything, connect a wallet, or paste an API key. Flippy trades from your Flipwallet's HyperCore account.

Getting started

  1. Add Flippy to your server with the button on this page, or DM it directly.
  2. Run /flipwallet and pick HyperCore to see your trading address.
  3. Fund it with USDC (next section).
  4. Ask for a small position, read the preview, and confirm.

Perps are leveraged, so start with sizes you can afford to lose. A position can be liquidated and lose all of its margin, and with cross margin, a bad position can drag down your other positions.

Get USDC onto HyperCore

Hyperliquid has two parts: HyperCore, where the order books live, and HyperEVM, a regular EVM chain. Trading happens on HyperCore, so that's where your USDC needs to be.

The easiest way in is to bridge from a chain you already hold funds on:

  • "bridge 50 USDC from Arbitrum to HyperCore"
  • "swap 0.02 ETH on Base to USDC on HyperCore"

Flippy finds the route and shows the quote. The swapping guide covers bridging in more detail. You can also send USDC straight to your HyperCore address, which /flipwallet shows.

Your Flipwallet uses Hyperliquid's unified account mode, so one USDC balance funds both spot orders and perp margin. You never move funds between spot and perps.

Open a long or short

Tell Flippy the asset, direction, margin, and leverage:

  • "open BTC long with 15x leverage and $20 margin, and set stop loss at 110k"
  • "short ETH with 5x and 10% of my balance"
  • "open SOL long with max leverage and $50 margin"

You can also use /perp long and /perp short commands to achieve the same result if you prefer an old-school way of interacting with Discord bots.

Before you press the confirm button, check the asset and direction, the margin and leverage (and the position size they add up to), the margin mode, and the estimated liquidation price. Maximum leverage and minimum order size are set by Hyperliquid for each asset. Flippy sends you a DM when a position fills or closes.

Isolated or cross margin

Flippy opens positions in isolated margin by default. Hyperliquid's own default is cross.

  • Isolated: each position has its own margin. A liquidation can cost you up to that margin, without touching your other positions' collateral. Adding margin lowers the liquidation risk without making the position bigger.
  • Cross: all cross positions share your account balance as collateral. Profits from one position can support another, but one big loss can liquidate all of them.

Say "with cross margin" in your request, or set margin-mode:cross, if you want cross.

Limit entries

To enter only at a better price, add a target:

  • "open ETH long with max leverage and $50 margin once it drops by 2%"
  • "short BTC with 10x and $30 margin at 105k"

A limit entry waits on Hyperliquid's order book. It can fill partly, fully, or never. Ask "show my open perp orders" to see what's waiting, and cancel an old order before you place a new one so you don't end up with both.

Multiple take profits and stop losses

You can split exits across several levels in one request:

  • "open HYPE long with $50 and max lev, set 50% TP at 10% gain, and 25% TP at 20%"
  • "set a stop loss on my BTC long at 95k and take profit 30% at 120k"

Each level closes the share of the position you named. A stop loss triggers at your price, but in a fast market the fill can be worse than the trigger.

Manage open positions

Ask "show my Hyperliquid positions" or run /perp positions for size, entry, PnL, and liquidation price. Click view trade history to view closed trades.

From there, plain requests work:

  • "close 50% of my HYPE position"
  • "close my ETH short"
  • "change leverage on my BTC long to 5x"
  • "add $10 margin to my SOL long"
  • "take profit on my BTC long now"

On isolated positions, adding margin lowers liquidation risk without changing the size. On cross positions, the liquidation price doesn't depend on the leverage setting, so partially closing the position or adding funds to your account is what reduces risk.

Spot trading and spot limit orders

The same HyperCore USDC buys spot tokens:

  • "swap 50 USDC to HYPE on Hyperliquid"
  • "buy me $100 of BTC once it drops below 110k"

Market buys go through the swap flow. Limit orders use /limit buy and /limit sell, and /limit orders lists them. Buying spot means you own the token. A long perp only gives you exposure to its price.

Share a PnL card

Ask "share my BTC long" or "show my HYPE position" and Flippy posts a PnL card for that position in the channel. Add "%" to show only the percentage and hide the dollar amount. Closed trades work too: "share my last ETH short".

Cards show your result to everyone in the channel. If a server you want to share your win (or rekt moment) at doesn't have Flippy, you can ask Flippy for PnL card in DMs and just copy paste the card image.

Trading leaderboard and weekly rewards

Every perp trade made through your Flipwallet counts toward Flippy's trading leaderboard. Ask "show weekly trading leaderboard" to see the current week.

Each week, the top three eligible traders split 50%, 30%, and 10% of the prize pool. The last 10% goes to one raffle winner drawn from everyone else who's eligible, with odds weighted by weekly volume. Ranking uses positive PnL multiplied by your loyalty, which is the share of your tracked Hyperliquid perp volume that went through Flippy.

Treat rewards as a bonus and don't trade more than you planned just to chase them.

Trading fees

Flipsuite charges a 0.1% builder fee on perp trades, on top of Hyperliquid's own trading fees. It applies to everyone, Mullet Club members included. Spot trades and swaps carry Flipsuite's 1% fee, which Mullet Club ($10 a month) removes. The order preview lists the fees before you confirm.

Trading in chat also uses credits, separate from trading fees: everyone gets 100 a month, and Mullet Club members get 1,000. Slash commands and buttons don't use credits, so they're a good fallback if you run out. See pricing for the rest.

If something goes wrong

  • Not enough funds. Check that your USDC is on HyperCore, not HyperEVM or another chain. Ask Flippy "what's my HyperCore balance?".
  • Order too small. Hyperliquid orders must have a minimum value of $10. Order value is calculated as the product of used margin and leverage.
  • No bridge route. Try a larger amount, or bridge a common token like USDC or ETH instead of a smaller one.
  • A limit order hasn't filled. The price hasn't reached your target. Check it with /perp orders and cancel it if you've changed your mind.

Confirmations and safety

Flippy asks before opening a position by default. In /profile you can skip chat confirmations for specific trading actions, like opening positions, managing take profits and stop losses, changing leverage, closing positions, or cancelling orders. Skipping them makes trading faster, but a misread request then goes straight to the order book.

Anyone who controls your Discord account can trade from your Flipwallet. Wallet security explains the custody model. Turn on Discord MFA before you fund a trading wallet.

Start by asking Flippy for your balance and your HyperCore address, then try placing a small order before you size up. Good luck!

Try Flippy in Discord

Add Flippy to your server, or install it on your Discord account. Simply tag Flippy in chat to get started.

Add Flippy

flipsuite.

The best reward system for internet communities.

Add Flippy on Discord

© Flipsuite 2026